Usage of instructions:apply: 1. clean wall with rubbing alcohol. do not use household cleaners. 2. for wire back frames, position post at the bottom. for sawtooth and other frames, position post at the top. remove red liner and press adhesive to hanger. 3. remove black liner. press hanger firmly to wall for 30 sec. wait 1 hour before hanging frame. 4. when ready to hang the frame, separate the stabilizer strips. press two strips together until they click. 5. remove one side of linersl. place each pair of strips as shown. press firmly. 6. hang picture on hanger. remove remaining liners and press frame to wall for 30 secs. remove: 1. grab bottom corners and peel frame from wall. do not pull straight off. 2. hold hanger gently in place. never pull the strip towards you! always pull straight down. 3. stretch each strip slowly against the wall at least 15 inches. repeat for stabilizer strips. - directions: apply: 1. clean wall with rubbing alcohol. do not use household cleaners. 2. for wire back frames, position post at the bottom. for sawtooth and other frames, position post at the top. remove red liner and press adhesive to hanger. 3. remove black liner. press hanger firmly to wall for 30 sec. wait 1 hour before hanging frame. 4. when ready to hang the frame, separate the stabilizer strips. press two strips together until they click. 5. remove one side of linersl. place each pair of strips as shown. press firmly. 6. hang picture on hanger. remove remaining liners and press frame to wall for 30 secs. remove: 1. grab bottom corners and peel frame from wall. do not pull straight off. 2. hold hanger gently in place. never pull the strip towards you! always pull straight down. 3. stretch each strip slowly against the wall at least 15 inches. repeat for stabilizer strips.

Usage of instructions:apply: 1. clean wall with rubbing alcohol. do not use household cleaners. 2. for wire back frames, position post at the bottom. for sawtooth and other frames, position post at the top. remove red liner and press adhesive to hanger. 3. remove black liner. press hanger firmly to wall for 30 sec. wait 1 hour before hanging frame. 4. when ready to hang the frame, separate the stabilizer strips. press two strips together until they click. 5. remove one side of linersl. place each pair of strips as shown. press firmly. 6. hang picture on hanger. remove remaining liners and press frame to wall for 30 secs. remove: 1. grab bottom corners and peel frame from wall. do not pull straight off. 2. hold hanger gently in place. never pull the strip towards you! always pull straight down. 3. stretch each strip slowly against the wall at least 15 inches. repeat for stabilizer strips. - directions: apply: 1. clean wall with rubbing alcohol. do not use household cleaners. 2. for wire back frames, position post at the bottom. for sawtooth and other frames, position post at the top. remove red liner and press adhesive to hanger. 3. remove black liner. press hanger firmly to wall for 30 sec. wait 1 hour before hanging frame. 4. when ready to hang the frame, separate the stabilizer strips. press two strips together until they click. 5. remove one side of linersl. place each pair of strips as shown. press firmly. 6. hang picture on hanger. remove remaining liners and press frame to wall for 30 secs. remove: 1. grab bottom corners and peel frame from wall. do not pull straight off. 2. hold hanger gently in place. never pull the strip towards you! always pull straight down. 3. stretch each strip slowly against the wall at least 15 inches. repeat for stabilizer strips.