Loctite Silicone Waterproof Multipurpose Adhesive Sealant 2.7 Oz. Clear Tube
Loctite Clear Silicone is a multipurpose adhesive and sealant which creates a permanent waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. Designed for indoor and outdoor use, Loctite Clear Silicone Waterproof Sealant can repair everything from electrical connections to seams on boots to stop leaks in wet weather as well as saltwater or freshwater aquariums. This all-season sealant creates durable, flexible bonds that resist extreme temperatures and impact and won't crack, peel, or shrink. Excellent for use on imperfect surfaces and filling gaps and bonds ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics. Loctite Clear Silicone Waterproof Sealant is Aquarium Safe and can be used for sealing or repairing sinks, tubs, aquariums, plumbing fixtures, door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, and shoes and boots as well. Not recommended for use on the following plastics: polyethylene, polypropylene, polytetrafluoroethylene (PTFE), polymethylmethacrylate (PMMA), polycarbonate or PVC. Not recommended for use on marble, limestone, cement, concrete, brass, copper, magnesium, iron, zinc or galvanized metals.
Protect work area. surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. pierce tube with point at end of cap. attach nozzle & cut to desired bead size. 1. as an adhesive: apply a continuous, even bead of silicone to one surface. assemble parts immediately. leave bond undisturbed for at least 2 hours. as a sealant: hold tube at angle. apply by pushing silicone into joint. 2. clean-up: uncured: mineral spirits. cured: carefully scrape excess with razor blade of sharp-edged too. open time: tack free time: 45 minutes. cure time: 24 hours. cure time dependent on temperature, humidity and thickness of product used. cured form: transparent, non-flammable, flexible solid. tensile strength: 325 psi. application temp: above: -35 degrees f (-37 degrees c) to 140 degrees f (60 degrees c). withstands: short term: -50 degrees f (-46 degrees c) to 392 degrees f (200 degrees c); long term: -50 degrees f (-46 degrees c) to 350 degrees f (177 degrees c). not recommended for: not paintable. do not use on marble, limestone, brass, copper, magnesium, iron, zinc or galvanized metals. hard to bond plastics such as pe, pp, ptfe, pmma, pc, or pvc. not suitable for below grade.
The information shown here may not be current, complete, or accurate. Always check the item's packaging for product information and warnings.
