Directions for use: Directions: 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. To puncture, place cap and nozzle on the tube and tighten down. 4. Apply a small amount of Gorilla super glue to one surface. Only one drop per sq. inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure. 6. After using, clean nozzle with a dry cloth and replace outer cap. - Directions: Directions: 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. To puncture, place cap and nozzle on the tube and tighten down. 4. Apply a small amount of Gorilla super glue to one surface. Only one drop per sq. inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure. 6. After using, clean nozzle with a dry cloth and replace outer cap. Store in a cool, dry place. Store away from children and animals. Storage recommendation: Store in a cool, dry place. Store away from children and animals.

Directions for use: Directions: 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. To puncture, place cap and nozzle on the tube and tighten down. 4. Apply a small amount of Gorilla super glue to one surface. Only one drop per sq. inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure. 6. After using, clean nozzle with a dry cloth and replace outer cap. - Directions: Directions: 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. To puncture, place cap and nozzle on the tube and tighten down. 4. Apply a small amount of Gorilla super glue to one surface. Only one drop per sq. inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure. 6. After using, clean nozzle with a dry cloth and replace outer cap. Store in a cool, dry place. Store away from children and animals. Storage recommendation: Store in a cool, dry place. Store away from children and animals.